Questions tagged [nodeos]

Questions about the EOSIO node software that can be used for validating transactions, broadcasting information, producing blocks, responding to API calls, and enabling local development. Questions may pertain to configuring the node, debugging its outputs, interacting with plugins, interacting with remote nodes, and others.

Filter by
Sorted by
Tagged with
1
vote
2answers
167 views

EOS Block Producer Schedule

I have followed the Boot Bios sequence of eosio and setup a eos private blockchain. The problem is my even though i have created also Block producers and also voted for them still the blocks are ...
1
vote
0answers
33 views

How many requirement to make EOS testnet

I have made my local EOS testnet. Almost I followed the Bios Boot Sequence Pages. So I made a "eosio" account and created two block producers that were registered in chain. So three were created. But ...
1
vote
2answers
132 views

Errors while building on eosstudio

I tried the below code from a tutorial of a simple eos contract on a game but i get 10 errors while building it on eosstudio wasted a lot of time trying to figure the errors out but failed appreciate ...
1
vote
0answers
37 views

EOS MainNet local blockchain

I'm trying to run a node, connected to mainnet with ability to search the whole blockchain. So that my node is connected to mainnet blockchain and gets all the new blocks, saving them to local disk. ...
1
vote
0answers
220 views

Node can't sync with the mainnet

my node has not been able to synchronize with the mainnet for a couple of months. A few weeks ago, synchronization was on ~95% but dropped to 93% in 2 weeks. Receiving new blocks in the mainnet faster ...
1
vote
1answer
160 views

Broadcast Smart Contract 'Hello World' error

I am going through the eos tutorial but I got stuck at the contract broadcast. When I compile the contract with eosio-cpp -o hello.wasm hello.cpp --abigen the console seems to get stuck and I have ...
1
vote
0answers
75 views

Command 'nodeos' not found

Till yesterday nodeos on my machine was working fine, today I installed eosjs after that eosio commands giving errors. Just like nodeos command giving following error: Command 'nodeos' not found, ...
1
vote
0answers
144 views

How does EOS validate signature and find that signature canonical or not?

I am signing transactions by third party service, but sometimes i get signature is not canonical. My question is what algorithm does EOS use for validation signature and check is it canonical or not? ...
1
vote
1answer
96 views

nodeos allow connection from any ip?

I was doing this tutorial. Locally it works fine, but I need to remotely access the endpoint via curl http://my.ip.adreess:8888/v1/chain/get_info But it doesn't work and I am sure it isn't my ubuntu ...
1
vote
2answers
120 views

How to get a list of accounts for a given smart contract

I see eosflare.io can list accounts that has transactions/actions with a specific smart contract. How? For example, here is eosflare.io's list of all DICE token holders: https://eosflare.io/token/...
1
vote
0answers
13 views

Where can I use external service to create my accounts? [duplicate]

I have been running nodeos on my Ubuntu VPS, and it is currently syncing with the public mainnet. What I want is to create accounts that can be used on public network. Can you please let me know how I ...
1
vote
1answer
60 views

What actions should be done to get binargs without EOS api abi_json_to_bin?

I am writing java code for communication with eos network and now need steps which should be done for retrieving data in the bin format without help of the node. Unfortunately I have not found ...
1
vote
1answer
357 views

Push signed transaction without packed transaction data in EOS?

In ripple, bitcoin and ethereum you can sign a transaction and push/broadcast signed transaction hash only. That effectively represents the whole transaction. for example ...
1
vote
0answers
35 views

Multiple action_traces, which one is the “good” one?

Sorry if I'm asking a lot of questions but you're really helpful and I'm getting a better understanding of the platform every day thanks to you ;) I'm having a hard time figuring out why some ...
1
vote
2answers
110 views

How to interface EOSIO smart contract with android dapp [duplicate]

I have been going through this To do Dapp tutorial how can I interface/build an android app for this?.
1
vote
0answers
39 views

Incorrect plugin configuration Genesis state can only be set on a fresh blockchain

I keep having this problem when starting nodeos. Anyone know how to fix it? "Incorrect plugin configuration Genesis state can only be set on a fresh blockchain." This is the command I use bin/...
1
vote
2answers
189 views

Get the last transaction from the blockchain

I'm looking for a way to get the latest transaction recorded on a particular account. For example, I'm trying to get the latest transaction for "newdexpocket", how can I do that using nodejs? Here's ...
1
vote
0answers
269 views

Error 3090003 - How to provide signatures for eosio.code?

When I try call custom smart contract action I get this error. message":"transaction declares authority: '{\"actor\":\"triviafrenzy\",\"permission\":\"active\"}', but does not have ...
1
vote
0answers
68 views

Transaction exception while pushing transaction

While calling the push transaction API with the following body { "signatures": ["SIG_K1_K5umBpyieHE6czvtDMEAVjypG5Zz5sYo4NKbUkqJfe562mX22aLGwwZsYSQJLhBZi5s3hvjg6zVfS3ZucM97Ji5KNXSm4a"], ...
1
vote
0answers
22 views

Why not broadcast confirmation once the receiver has confirmed the block successfully

Now in the main net, when a transaction is packaged, it means that the current node confirms it, and it needs at least 2/3 of the 21 super nodes to confirm. In addition, two rounds of confirmation are ...
1
vote
0answers
20 views

Need to perform something on the time of block creation

Is there any way to include a script or anything else for achieving something on the time of creation of a block? for example, A simple token transfer on the time of block creation.
1
vote
0answers
69 views

aliased cleos, how to alias nodeos?

I aliased my cleos on port 5555 and 7777, like in the tutorial https://developers.eos.io/eosio-home/docs/getting-the-software I was wondering if there was a way to alias nodeos as well, because when ...
1
vote
2answers
259 views

How to transfer/deposit tokens on Front end Dapp with Scatter?

I am working on an EOS frontend Dapp with Scatter on local chain. I am getting a problem with transfer/deposit tokens from one account to another. After logging into scatter with "test1" and trying to ...
1
vote
0answers
71 views

Net Plugin vs BNet Plugin

I'm using NodeOS 1.3.2 and I'm trying to understand what the difference between the BNet Plugin and the Net Plugin are. As I understand it, BNet is meant to be a new, fancy replacement for Net that ...
1
vote
0answers
287 views

How to do a transaction using rpc with python?

I am trying to make a transaction on eos. I have a node running on docker and created an account with cleos. I tried following this: https://github.com/EOSBlock/EOS-Tutorials/blob/master/EN/transfer-...
1
vote
0answers
27 views

Where is the eos blockchain downloaded on ubuntu when running the nodeos command?

I finally got eosio installed on ubuntu and ran the command: nodeos -e -p eosio --plugin eosio::chain_api_plugin --plugin eosio::history_api_plugin I see that its syncing with the blockchain, but ...
1
vote
1answer
92 views

What is keos in regards to cleos and nodeos?

I know that cleos is for communicating with nodeos which communicates with the EOS blockchain as a whole. But what is keos in relation to those 2? Also is keos also packaged with nodeos and cleos?
1
vote
0answers
27 views

Installing nodeos error: OpenSSL must be configured to support threads

While I am building the nodeos source code in my computer, I get an error " .../src/crypto/aes/cpp:14:3: error: "OpenSSL must be configured to support threads" and the build stops. I referenced ...
1
vote
1answer
112 views

make nodeos use mongod.conf to change dbpath

Currently when trying to use the mongodb plugin, I get this error 2018-10-11T15:47:15.635 thread-0 mongo_db_plugin.cpp:513 handle_mongo_excepti ] mongo exception, mongo init, line 1391, code ...
1
vote
0answers
22 views

Multi Block Production

I want to create 4 Block Producers. I am following this tutorial and giving the same genesis for every node. I am only able to run two block producers. Is there any way to solve this?
1
vote
1answer
40 views

Calling action from different network

I am running a local blockchain on my computer. And I want to call an action on my node using eosjs from another computer in another network. My current http provider in the config section of ...
1
vote
0answers
109 views

Error while creating an account

I got that error while creating an account, anyone knows what's wrong? Here is a recording of what happened now; after enter, I get no output, I need to press Ctrl+C to exit : > ~$ cleos create ...
1
vote
0answers
149 views

How to setup multinode EOS cluster on various vms

How to setup multinode EOS cluster on lets say various aws/azure instances ? I have tried the multiple eos node deployment on single machine as described here - https://developers.eos.io/eosio-nodeos/...
1
vote
1answer
70 views

Can I change the local nodeos blocktime?

I want to change the existing block-time (0.5 sec) to a specific value. How to do that?
1
vote
0answers
144 views

How to get assertion messages from Nodeos?

When I trigger a failing eosio_assert my Nodeos instance outputs something like: 2018-08-01T16:45:42.006 thread-0 http_plugin.cpp:476 handle_exception ] Exception Details: 3050003 ...
1
vote
0answers
43 views

nodeos compilation and missing libsoci_core.so.4.0 library

compiled and installed latest release of soci lib. set $PATH to include compiled libraries. compiled 1.1 release with sql plugin now they i try to run nodeos with sql plugin enabled i get this error: ...
1
vote
0answers
181 views

Debug tools in EOS

What debug tool can print useful readable info when debugging EOS? In the following, I am using Xcode to debug/trace Cleos execution. auto arg= fc::mutable_variant_object ("code", ...
1
vote
0answers
135 views

nodeos . Corrupted database after server shutdown. Can't launch

it seems like the PC's shutdown jacked up my blockchain database. At first it asked something like replay is required I ran it with --replay-blockchain - didn't work. Then I ran it with --hard-...
1
vote
0answers
52 views

How to understand the reflect macro?

FC_REFLECT( eosio::history_apis::read_only::get_actions_params, (account_name)(pos)(offset) ) I don't understand the reflect macro, and don't know where the macro was applied. Could anybody help me?
1
vote
0answers
22 views

consensus algoritm test with EOS test-net

guys i have some question Is EOS can consensus algoritm test with EOS test-net? i wonder if i consist of 21 nodeos and connect to each other, consensus will working? please, recommend anything for ...
1
vote
1answer
113 views

Main steps for preparing IDE for Nodeos development

I'm a Java developer so I am a bit new to prepare IDE for C+ project. What are the main steps for preparing development environment for Nodeos? I downloaded full source code from github/eos/eosio and ...
1
vote
0answers
86 views

nodeos won't run properly, gives time error (Ubuntu 16.04 VM)

This is what I get in my console when I run nodeos, this is on an Ubuntu 16.04 VM: sunny@sunny-VirtualBox:~$ nodeos 3488600ms thread-0 chain_plugin.cpp:125 plugin_initialize ] initializing chain ...
1
vote
1answer
179 views

How To Reset After Unclean Shutdown? Addr in use; no instance of nodeos running

Here's how I'm running nodeos: nodeos -e -p eosio --plugin eosio::chain_api_plugin --plugin eosio::history_api_plugin I already tried deleting the "data" folder in .local/share/eosio/nodeos/ and ...
0
votes
1answer
77 views

EOSIO - Error 3120006: No available wallet

I have created wallet using RPC API. http://127.0.0.1:8891/v1/wallet/create Here, keosd run on port number 8891 and nodeos run on 8892. Then, I have opened, unlock and import key into wallet using ...
0
votes
1answer
57 views

Create test account using EOSIO

I am new with EOSIO. I have created account using cleos command. cleos create account eosio bob YOUR_PUBLIC_KEY cleos create account eosio alice YOUR_PUBLIC_KEY It's successfully created. But, I ...
0
votes
1answer
217 views

How to fix nodeos.logs showing “chainbase database format not compatible with this version of chainbase.”

After following the guide to start my local node here I issue the commands brew tap eosio/eosio brew install eosio keosd & nodeos -e -p eosio \ --plugin eosio::producer_plugin \ --plugin eosio::...
0
votes
1answer
242 views

How to run eos nodeos with sync starting at top of chain (current head block)?

I'm attempting to run a non-historical node that has access to the most recent block data. My current plugins are: plugin = eosio::chain_api_plugin plugin = eosio::chain_plugin plugin = eosio::...
0
votes
1answer
64 views

Where to get JSON Schema for EOS endpoints api?

Where to get JSON Schema for EOS API endpoints ?
0
votes
1answer
115 views

Is there an EOS mainnet - similar to the Ethereum Public Network?

I have been a little confused by the structure of EOS. If I state how I use Ethereum, perhaps someone can draw a parallel to EOS. I use the mainnet in Ethereum for production level work and deploy in ...
0
votes
1answer
17 views

Why is snapshot size is so small?

1) Snapshot file size is remarkable small relative to blocks.log size. Exactly what data is stored in snapshot file? 2) As I understand contracts states is stored in snapshot file. But history_plugin ...